Commercial, shower and residential glass across Northern Virginia, DC and Maryland

Two glaziers setting a large glass lite into a storefront at night
Frameless tempered glass shower enclosure with black hinges and a glass door
A glazier fitting a glass sidelite beside a wood front door

Storefronts secured and re-glazed. Frameless enclosures templated to your finished tile. Foggy sealed units swapped without disturbing your frames. One local crew, on call around the clock.

10% Off Any Glass Work — mention it when you call

  • 24/7 Emergency Service
  • 58 cities served
  • Insured

Start here

Tell us what kind of glass you have

Three different trades share the word “glass.” The measurements, the hardware and the code that governs each one are not the same. Pick the one that matches your job, then drag the handle to see what we are replacing.

Two glaziers setting a full-height glass partition panel in an office
Drag to compare
Illustration. Both halves are the same photograph — the failed side is a filter and a drawn overlay, not a customer job.

Commercial Glass for Storefronts, Offices and Retail

Impact takes out a storefront lite and the building is open all night. The opening gets secured first — plywood cut to the frame and fastened to the aluminum. Then we template, order the glass, and set it when it lands.

24/7 Emergency Service

24 hours · 7 days

Glass broken right now?

Break-in, storm damage, a failed panel in a stairwell — the building has to be closed up before anything else happens. We board up with plywood cut to the opening and fastened to the frame, sweep the glass, and take the measurements for permanent replacement on the same visit. Storefront and tempered glass is made to order, so the board-up is what holds the property while it is fabricated.

  • Boarded up on the first visit
  • Measured for permanent glass the same trip
  • Washington, DC · Northern Virginia · Maryland

Bonded & Insured

Residential and commercial

24/7 Emergency

Seven days a week

Free Estimates

No obligation

Locally Owned

Residential and commercial

Upfront Pricing

Never an overtime charge

Commercial

Commercial Glass for Storefronts, Offices and Retail

A broken storefront is an open door, a liability claim and a closed register at the same time. Call the dispatch line and the opening gets secured first — plywood cut to the frame and fastened to the aluminum, not taped over the hole. Then we template the opening, order the glass, and set it when it lands.

Most commercial work is not breakage, though. It is a door dragging on the threshold, a closer slamming hard enough to crack the lite, a lobby partition being reconfigured for a new tenant, a property manager who needs the fire-rated glazing documented before an inspection. We handle the hardware and the glazing together, because on an entrance they are the same job.

Storefront glazing
Quarter-inch tempered in standard aluminum framing, insulated units where the frame is thermally broken. We match the existing glazing pocket and gasket, not just the dimensions.
Doors and hardware
Bottom pivots, thrust bearings, closers, panic devices, pull handles. A door that drags is almost always a worn pivot, not a bent frame.
Occupied buildings
After-hours and weekend work when the space cannot come offline. Floors protected, cuts made outside, debris hauled out with us.
Two glaziers setting a full-height glass partition panel in an office
Drag to compare
Illustration. Both halves are the same photograph — the failed side is a filter and a drawn overlay, not a customer job.

Shower & Bath

Frameless Shower Doors and Custom Bath Glass

A frameless enclosure is a measuring job that happens to involve glass. Tempered glass cannot be cut, drilled or notched once it leaves the oven — every hinge cutout, handle hole and polished edge is machined first, then the panel is tempered. Get the template wrong and the panel is scrap, not a trim job.

So we template the finished tile rather than the framing, and we check plumb on every wall before anything is ordered. Bathrooms in this area are rarely square, and half an inch of lean across a tall panel is the difference between a door that stays where you put it and one that drifts shut on its own. Where a wall is out, we correct it with hardware and channel — never by forcing the glass.

The glass
Three-eighths tempered for most enclosures, half-inch where a panel spans wide or carries the door. Clear, low-iron, frosted, or a rain and reeded pattern.
The hardware
Wall-mount and glass-to-glass hinges, header bars, U-channel, sweeps and seals — finish matched to the fixtures already in the room.
Mirrors and glass shelving
Cut and polished to the opening, backed and set flat so a vanity mirror does not telegraph every ripple in the wall behind it.
A technician measuring beside a frameless glass shower enclosure in a finished bathroom
Drag to compare
Illustration. Both halves are the same photograph — the failed side is a filter and a drawn overlay, not a customer job.

Residential

Residential Window and Door Glass Repair

Fog between the panes is a failed seal. No cleaning reaches it, and no bead of caulk brings it back — the desiccant in the spacer is saturated and the unit is finished. We measure the sealed unit, order it built to size, and swap it into the sash you already have. Frames, trim, paint and interior stay untouched.

A cracked pane works the same way. Most windows around here were designed to have their glass replaced, and a whole-window quote is often just the easier sale. When the sash is rotted, the balances are shot or the frame is out of square, we will say so and tell you replacement is the honest answer. When it is not, we will say that too.

Sealed units (IGU)
Double and triple pane, argon filled, Low-E coated, rebuilt to your existing overall thickness and spacer so the sash closes and locks the way it did.
Patio and entry doors
Tempered panel glass, rollers and track. A slider that takes two hands is usually rollers and a packed track, not the glass.
Everything else in the house
Door lites and sidelights, transoms, skylights, arched and custom shapes, plus screens re-meshed in fiberglass or pet-resistant cloth.
Brick colonial home with double-hung windows, a bay window and a glazed front entry
Drag to compare
Illustration. Both halves are the same photograph — the failed side is a filter and a drawn overlay, not a customer job.

Interactive tools

Every tool below is running right now

22 of them, 5 in true 3D. They build your enclosure, entrance or railing from your own measurements, run the code checks against your numbers, and hand you a spec sheet to send us. No sign-up, no email gate.

How a job runs

Four steps, and no surprises in the middle

Almost every glass complaint traces back to one of two things: a measurement taken in a hurry, or a lead time nobody mentioned. Here is how we handle both.

  1. A double-hung window pane cracked in a spider-web pattern, seen from inside a home

    Tell us what broke

    Call, or send photos through the estimate form. One shot of the whole opening, one close-up of the damage, one of any stamp in the corner of the glass. That stamp tells us whether the pane is tempered and who made it.

  2. A glass technician kneeling to measure the height of a window opening with a tape measure

    We measure it properly

    Sealed units get measured for width, height and overall thickness, plus the spacer, so the sash still closes and locks. Frameless shower and storefront work gets templated on site against finished surfaces, with plumb checked on every wall.

  3. Gloved hands scoring a sheet of glass against a steel straightedge on a fabrication bench

    The glass gets made

    Tempered and insulated glass is fabricated to your numbers — it cannot be trimmed on the truck. Common residential sizes move fast; custom shapes, low-iron, patterned and fire-rated glass take longer. You get the real timeline, not a hopeful one.

  4. An installer setting a new sealed glass unit into a double-hung window

    Installed and cleaned up

    Old glazing out, gasket or sealant renewed, new pane set and checked for square. Door hardware adjusted while we are there. Every shard and every offcut leaves with us.

More detail on scheduling, access and what to expect on install day is on the how it works page, and the repair guides cover the common problems in full.

Why Virginia Glass Windows

A glass company, not a lead broker

Virginia Glass Windows is a locally owned residential & commercial glass company that has worked the DC metro for over a decade. The same crew handles the storefront on Monday and the shower enclosure on Thursday, which is why nobody has to be talked through your building twice.

10% Off Any Glass Work. Mention it when you call (703) 470-7867.

A glazier tightening the base clamp of a frameless glass railing on a deck
One crew, from storefronts to railings
  • 24 hours, seven days

    Not an answering service that books you for Tuesday. The line is answered at night and on weekends because break-ins and storm damage do not wait for business hours.

  • Bonded and insured

    Certificates go to property managers and general contractors before we mobilize. Commercial buildings will not let a glazier on site without them, and they should not.

  • One metro, three jurisdictions

    Northern Virginia, the District and Maryland write and enforce their glazing requirements differently. Working all three every week is the only way to keep that straight.

  • Locally owned, ten-plus years

    The person who quotes your job is the person who has to stand behind it. That is a different incentive from a national brand routing a lead to whoever is closest.

Free estimate

Tell us what you need

Name, phone and the type of glass — that is enough for us to call you back with a real answer, usually within two hours. No form letters, no auto-replies.

  • Response within 2 business hours
  • No obligation, no pressure
  • Have photos? Even faster via photo estimate
Prefer to call?(703) 470-7867
Or send photos for a faster estimate

I'm not a robot

Tick the box before sending.

We call you back — no automated replies. Your information stays private.

Service area

Where we work

One metro, three sets of rules. A basement egress opening in Fairfax County, a rowhouse window in a DC historic district and a storefront in Montgomery County each get reviewed against their own jurisdiction before we order glass.

255 cities and neighborhoods across Northern Virginia, Washington DC and Maryland — each one has its own page.

Commercial glass by business type

A restaurant vestibule, a dental operatory and a hotel lobby have different glazing, different hours and different tolerance for downtime. These pages cover the specifics.

Questions we get every week

Straight answers about glass work

In most cases, yes. Both single panes and sealed insulated units are replaceable inside the frame you already have, which leaves your sash, trim, paint and interior finish alone. Full window replacement only makes sense when the sash is rotted, the balances have failed, or the frame has moved out of square. We tell you which one you are looking at before anything is ordered.

More on the full FAQ, or read the write-ups on common glass problems.

Get started

Leave your number, we call you back

Name, phone and email — that is all it takes. Or send photos for a faster estimate. Commercial and shower work we come out and template on site.

I'm not a robot

Tick the box before sending.

Send photos instead

24-hour emergency service, seven days a week, across Northern Virginia, Washington DC and Maryland.